If you are thinking about updating your bathroom, one of the many options you’ll have is to install a new custom shower door.
These doors can help to dramatically improve the aesthetics of your bathroom quickly and affordably.
Whether you’re planning on just redoing the shower door or you are remodeling the entire room, this option should be one that you take very seriously.

Here at CHEAP SHOWER DOORS we have been helping people throughout NYC and Brooklyn to get the great looking doors on their shower that they have always wanted.
Our team of professionals can work with you to design and install the shower door in your home so that it looks just like you’ve always wanted.


Frameless Bath Screens

Frameless Corner Enclosures

Frameless Shower Enclosures

Frameless Shower Panels

Frameless Three Sided Enclosures

Frameless Walk-In Enclosures

Neo Angle Shower

Sliding Shower

Steam Shower

View some ideas

Click on the small pictures below to view some ideas on how you could have your new glass shower in your bathroom designed.
There are countless ways to make your project look better... If you can imagine it, you can make it!)

Open all
Beveled Glass
Beveled glass has an angle cut around the edge of the glass to create a prism effect. The effect is used most often to adorn thick mirrors or windows. The effect changes depending on the thickness of the glass and the angle of the bevel. Glass can be beveled whether it is smooth, textured, clear or colored.
Back Painted Glass
- back painted glass is glass that has been painted on the back side, so that the color shines through when viewed from the front. It was originally used for industrial work, for example, to hide heating ducts and pipes, but it has branched out into more decorative roles. Back painted glass is now commonly used in commercial and residential buildings for items such as counter tops, back splashes, spandrel glass, and colored walls.
Bullet Proof Glass
– Bullet proof glass is the fusion of two or more substances to make a material that is very resistant to high-velocity impacts, such as that from a bullet. Generally, it is not glass at all but rather acrylic, or solid plastic. Acrylic is much easier to work with and install than glass. Bullet proof glass can also be formed by combining two or more layers of soft and hard glass. The soft layer is flexible, allowing it to bend instead of shattering, while the hard glass creates a strong barrier. Alternatively, a sheet of glass may be fused with polycarbonate or a transparent plastic resin. Bullet proof glass may vary from three-quarter to three inches in thickness.
Colored Glass
Colored glass is produced by adding impurities in the sand mixture that is used to manufacture the glass. For example, dark glass units are made by adding iron impurities and sulfur produced as a result of coal burning during the glass melting process. Glass can also be colored using minerals and pigments obtained from purified metal salts. Some of the popular impurities used to color glasses include gold chloride (in case of ruby glass) and uranium oxide (in case of uranium glass).
Decorative Glass
– Decorative glass is used in decorative doors, windows and cabinets for homes and offices. It is the ideal glass for spaces where privacy and elegance are required. The glass is etched, sandblasted, cut, textured and customized to meet individual needs and requirements. These glasses create an attractive look and dramatic effect in any space while pouring the light from corner to corner and creating an open feel.
Digitally Printed Glass
– Digitally printed glass is produced by combining toughened glass with the latest digital printing technique. This process has been able to revolutionize modern interior design and take it to a whole new level by offering a wide range of wall coverings and splash-backs. The printed glass thus created is extremely versatile and can be made to blend with any environment – domestic or commercial. The visual results are full of depth, color, brilliance and contrast.
Etched Glass
– Etched glass is the result of etching or creating art on the glass’s surface using acid and/or abrasive materials. The end product has a white or frosted finish. The technique is used to decorate the glass after it is blown and cast, and can be found in a wide range of decorative elements, such as doors, windows, furniture, vases, dishes and glass platters.
Fire Rated Glass
-Fire rated glass is produced in such a manner that the glass is thoroughly glazed to protect itself from flames and smoke, and to prevent the flame from spreading. The materials used to manufacture this glass include tempered glass and glass ceramics. Fire rated glass used in panel units contain multilayer assemblies to block conductive heat and energy. They are suitable for use in walls, floors, ceiling and glass doors that are susceptible to fire damage.
Float Glass
– Float glass is produced from molten glass that is made to float on a molten metal bed, usually tin. The metal used here varies from manufacturer to manufacturer – some use lead or alloys with low melting point. This technique of glass preparation gives it a flat surface along with uniform thickness.
Frosted Glass
– Clear sheet glass is either sandblasted or acid etched to form frosted glass. The end result is a translucent glass sheet that scatters and transmits light passing through it while blurring images. Frosted glass units are also produced with frosting spray. The spray is made to adhere to the glass and the resulting finish is a slightly pebbled glass surface that obscures clarity. The glass frosting is prevented from seeping with the help of stencils that are laid down with tape.
Glass Tiles
– Glass tiles are produced by combining various glass pieces into one consistent shape. This type of glass unit is used in floors and walls. Modern glass tile technology involves reusing broken glasses and recreating it to form ‘green glass’ tiles. Today, it is commonly found in spas, kitchens and bathrooms.
Heat Resistant Glass
– Heat resistance glass is more resistant to heat than any other ordinary type of glass. This glass is more suitable for cooking, construction and industrial applications where high temperature is likely to cause normal glass to break. Heat resistance glass has a lower thermal expansion coefficient. In other words, it expands more slower than normal glasses when heated, thus preventing it from shattering.



Treat your family or your clients to a higher quality shower experience with a custom glass enclosure manufactured by our team. Whether you’re a home or business owner, you likely have your own ideas about what you want your bathrooms to look like. However, finding the right shower enclosure can be challenging, especially if you don’t want to settle for the limited selection at your local big box store.


At Glass Designs we offer the complete package,
working with you from the initial design stage all the way through to manufacturing, installation and aftercare.



Our Blog

Saturday, December 7, 2019

Advantages of glass spatial constructions

Advantages of glass spatial constructions:
no matter how large the glass building, in any case it looks lighter than built from traditional materials, thanks to the glass facade;
glasses with programmable properties will delay harmful ultraviolet thermal radiation, letting through only the optimal amount of solar and thermal energy;
low thermal conductivity of glass allows building owners to save on the cost of its maintenance;
many glass finishes make it possible to create an elegant interior in any room.
The functionality of glass is used not only outside. The interior equipment of buildings with glass partitions, including transforming ones, glass stairs and railings, fences - all these are used by designers with pleasure to create modern elegant interiors in entertainment, office and shopping centers and in private houses. Refinement and lightness coupled with durability and reliability - is this not the best combination for a modern interior, is not it?
Advantages of glass spatial constructions
Advantages of glass spatial constructions


Glass spatial constructions relatively recently, but rather quickly and undoubtedly seriously and permanently took a place next to us. Just a couple of dozens of years ago, we froze delighted to see a huge glass building, and cautiously entered the glass platforms located at high altitude.

Gradually, with the advent of an increasing number of such buildings, we got used to the fact that glass is the same building material as concrete, brick, wood, only much more beautiful, elegant and unpretentious. With the apparent fragility, the glass does not need to be repaired, and it needs the minimum prevention. It is little affected by the environment. For example, glass doors can only be cleaned from street dust from time to time.