Sunday, May 5, 2019

Beam fence with glass do it yourself

Beam fence with glass do it yourself

The fencing of glass and painted wooden beams is quite realistic to do yourself in the presence of materials and the minimum necessary tools, such as a drill and a mounting gun. Girder fencing with glass can significantly visually improve your estate or porch, especially since they can be tailor-made for almost any application. With the right glass, today it is as durable and safe as fully wooden structures, but they look much more attractive and modern. So, what steps should we take to build our own glass beam fencing ... Step 1 girder fencing with glass with your own hands After the girder frame is installed, adjust the top and the base to match the proportions 2 x 4. Hands Attach the 3 ″ pre-drilled rails and pre-prepared screws to the deck. Use spacer blocks to hold the rails in a suspended position when you screw in the screws. Step 3 Do-it-yourself beam glass fencing Glue the plate to the top and bottom in the appropriate place, at a rate of 1 x 3 per half, to make the plates, you can use 1 x 2. Step 4 Do-it-yourself glass fencing Buy tempered tinted glass that will be accuracy to match the opening (minus several mm on each side). A thickness of 15 mm is optimal, although 10 mm is also an acceptable solution (and much cheaper) for narrower places. Glass must be necessarily tempered because so its strength increases significantly. Step 5 Do it yourself with hand-made beams and glass fences. We place self-adhesive vinyl bumpers approximately 20-30 cm across the bottom bar along with
Beam fence with glass do it yourself

Beam fence with glass do it yourself
Beam fence with glass do it yourself
the entire plate. To prevent water from collecting under the glass and onto the bottom bar, simply drill holes on each side of all the bumpers. Step 6 How to make the fence itself of beams and glass Install the glass on top of the bumpers, align it and press firmly against the shields. Step 7 Place the main plate against the glass under the main rail and glue it with a construction gun and liquid nails, without touching the glass, then attach a support plate.
Location: 99 Avenue T, Brooklyn, NY 11223, США